The World's Most Trusted Name In Power Protection!

The SEQ1216i is 16-amp load-capable and has 10 industrial grade earthed IEC mains receptacles, including four sequenced banks plus 2 always on receptacles. A rear panel warning light will indicate incorrect polarity of the mains supply. Integrators can specify bank-to-bank delay times of 2, 5, 10, 15 and 20 seconds. The turn on sequence can be initiated either by the front-panel operation switch or the rear-panel Phoenix connector by using an applied voltage (5-30vdc) or contact closure switch. The Phoenix connector can also be used to cascade multiple units or provide status to a management system.

The unit features both common mode and normal mode Impedance Tolerant® EMI/RFI filtering and COUVS® - Catastrophic Over/Under Voltage Shutdown for a complete power conditioning solution.

SurgeX Advanced Series Mode® technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as earth contamination or common-mode disturbances.

Download Specs - Installation Guide - A & E Specification

SPECIFICATIONS

• Load Rating: 16 amps @ 230 volts 50 / 60 Hz
• Power Requirement (no load): 15 watts
• Number Of Sequenced Banks: 4 (2 receptacles each bank)
• Number Of Always On Receptacles: 2
• Surge Let-Through Voltage (6000-volt surge): 0 volts
• Safety Certification: IEC/EN 61643-1
• Performance Rating: Grade A, Class 1, Mode 1
• EMI/RFI Filter, Normal Mode (50-ohm load): 40dB @ 100kHz; 50dB @ 300kHz; 50dB @ 3MHz; 50dB @ 30MHz
• EMI/RFI Filter, Common Mode (50-ohm load): 18dB @ 300kHz; 30dB @ 1MHz; 50dB @ 5MHz; 50dB @ 20MHz
• Maximum Applied Surge Voltage: 6000 volts*
• Maximum Applied Surge Current: Unlimited, due to current limiting*
• Maximum Applied Surge Energy: Unlimited, due to current limiting*
• Endurance (C62.41-1991 Category B3 pulses): 1 kV>500,000, 3 kV>10,000; 6 kV>1000
• Undervoltage Shutdown: 180 volts (auto resetting)
• Overvoltage Shutdown: 280 volts (auto resetting)
• Remote Turn-on Applied Voltage Range: 5 to 30 volts DC
• Remote Turn-on Current Draw:
  • Contact Closure: 1.0mA
  • 5V DC Applied Voltage: 0.1mA
  • 12V DC Applied Voltage: 0.5mA
  • 24V DC Applied Voltage: 2.0mA
• Auxiliary Relay Contact Rating: 30 Volts at 1 Amp
• LED Output: 12 volts DC, maximum 10 mA (resistor included)
• Delay Time Per Bank: 2, 5, 10, 15, 20 seconds (switchable)
• Dimensions: 4.5cm H x 48.3cm W x 26.7cm D (Single Rack) 1.75"H x 19"W x 10.5"D
• Weight: 5.9 kg (13 lbs)
• Temperature Range: 5° to 35° C
• Humidity Range: 5% to 95% R.H., non-condensing

*1.2 x 50µs pulse, industry standard combination wave surge, as per IEEE C62.41

TECHNICAL DESCRIPTION

The SEQ1216i shall be a one rack-space unit in a magnetic shielding enclosure. It shall operate from 230 volts AC 50Hz / 60Hz and have a 240cm (2.5m) power cord. There shall be 10 earthed IEC outlets on the back panel, with 4 sequenced banks of 2 receptacles (each bank) and 2 always on. The SEQ1216i shall have remote control capability with a visual indicator. Overall dimensions shall be 4.5cm H x 48.3cm W x 26.7cm D (1.75” H x 19” W x 10.5” D). Weight shall be 5.9 kg (13 lbs).

The SEQ1216i shall operate on a 230 volt platform and feature a self test circuit with visual indicator, and provide EMI/RFI filtering and catastrophic over/under voltage shutdown. There shall be a rear panel polarity warning indicator. It shall meet Grade A, Class 1, Mode 1 guidelines for powerline surge suppressors and withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts. The SEQ1210i shall be safety certified to IEC/EN 61643-1.

Countries Included in this Region

• Switzerland
• France
• Germany
• Denmark
• Italy

• Belgium
• Poland
• Czech Republic
• Slovakia
• Iceland

• Finland
• Chile
• Holland
• Norway
• Portugal

• Spain
• Sweden
• Philippines
• Russia